DIYHD 8FT Ceiling mount sliding barn wood door track stainless steel ceiling bracket hardware for interior door
On Sale Now! Free Shipping Included! Save 7% on the DIYHD 8FT Ceiling mount sliding barn wood door track stainless steel ceiling bracket hardware for interior door by DIYHD at Resepbuat. MPN: cssfsceiling8ft. Hurry! Limited time offer. Offer valid only while supplies last. Ceiling mount bracket barn door track kit mainly suitable for the openning that don't have enough space to install wall mount track. The kit only
Ceiling mount bracket barn door track kit mainly suitable for the openning that don't have enough space to install wall mount track.
The kit only suitable for door thickness:35-40mm(1.37"-1.57")
Pls make sure your ceiling is strong enough to hang door panel
Our track had been pre-drilled holes for ceiling bracket.
Step to install ceiling barn door kit:
Prepare door panel and hardware:
Door panel's height is ceiling height-14mm,pls use thickness 40mm door panel.
Drill two holes on the door panel and cut a groove on the bottom of the door.(See our posted drawing photo)
Fix rollers on the door panel.
Put two stops on the track and found a best place before install ceiling bracket.
Fix track on the ceiling:
Release the screws on the ceiling bracket and fix half part(round) on the track,the other part(L) tight on the ceiling.
A:release the little screws on the round part,put the cyliner piece inside of the track then tight the screws,pls see attached photo.
B：stand the door up and found a best place on the ceiling to install L part bracket(you can decide the gap between door and wall).
C:tight the L part on the ceiling,then put two bracket parts together.
Install floor guide.
Features & Highlights
- Hardware only,not including door panel;Material:stainless steel 304;Surface:brushed satin
- Suitable for door thickness 1 3/8"~1 3/4"(35mm-45mm);Two rollers can bear max weight 90kgs;Package's including:Roller:2pcs;Stopper:2pcs;8ft sliding track:1pcs;L ceiling mount bracket:5pcs;Floor guide:1pcs
- Important:Door Height is ceiling height minus 9/16"(14mm);Drill holes on the door panel(the length between center hole and the top of the door panel is 1-9/16"(40mm);The ceiling bracket inner center hole to the wall length is 2-3/8"(60mm)
- The advantage of this product is supper small gap between door and ceiling and the controllable gap between door and wall
- The installation manuel in the package is NOT correct,pls check the drawing in the post and check our installation vedio in our store:https://www.amazon.com/stores/page/D4C869BC-28C5-43F9-B99F-146E5FCAB146?ingress=2&visitId=4e651e9a-602c-4a44-b637-b19b6ce80bf7;Anything unclear,pls feel free to email me
|Package Weight:||16 pounds|
|Package Size:||7.24 x 3.5 x 3.5 inches|